FixMyKite.com 9mm Inflate Kiteboarding Valve, 1 way Reviews for the product - FixMyKite.com 9mm Inflate Kiteboarding Valve, 1 way (Back to product)
 
 
11 Product Reviews - Average rating 4.7 / 5 (Best Rated | Worst Rated | Most Recent | Oldest)
Click to review this product
Replacement valves

- 11/1/2018

Love this generation of valves. They are easy to install and work great.
Easy to install and reliable

- 10/26/2018

Same as original thise valves perfectly stick on the strut and bladder. Changed my old that melted away with those in a very difficult enviroment, over 50 degrees durinh summer in the middle east. Glue is strong and does not melt. I found Jeff video tutorial very helpful.
Great product

- 9/24/2016

These inflate valves are a great buy. Jeff and the team at Kiteboarding.com and FIXMYKITE.COM really got it going on.
Purchasing their products is a no brainer.
Delaminates with time

- 3/18/2016

I've used a couple of these valves to repair my go-to kite. Both repair valves delaminated from the Tear-Aid carrier after 15-20 sessions, about 6 months while the Tear-Aid remains nicely attached to the bladder. I've noted that Jeff Howard says to not leave your kite in your vehicle, especially during the summer and I'm pretty careful about this. I think the glue used to hold the valve to the Tear-Aid carrier is simply deficient.
9mm valve

- 10/9/2015

I had questions about replacing the valves on my kite myself. I call the shop and talked with one of the guys. Not only did they reassure me that I could do this on my own. but give me some tricks of the trade. My repair was a success thanks to the great help!
Replaced valve

- 3/11/2013

Used this valve on my Wainman main bladder. Very easy to use and works great. If you fly Wainman, you may run into valve trouble eventually. I' m packing one of these just in case.
Just like new valve

- 9/21/2012

This valve attaches to the bladder just like they say it will. The self adhesive makes it simple to just peel and stick. It is as easy as 1,2,3 and actually makes an old bladder just as good or even better than new.
easy istallation and works great

- 7/11/2011


Almost too easy

- 4/15/2011

The Fixmykite valves are almost too easy to believe. I watched the video just to confirm that it really was that simple...clean, peel, stick, go kite.

Careful pulling the backing off the new valve so you don't let the valve seat get stuck to itself. Also be careful if you have a one pump system on your struts as the one pump valve can come loose when pulling the LE bladder out to replace the inflation/dump valves. Don't ask how I know this...

Great stuff, thanks.
Fixmykite.com 9mm 1 way valve.

- 11/7/2010

True I could have got the same valve from another shop however only Kiteboarding.com shop personnel took the time to explain how to properly apply the valve to the bladder & why the Fixmykite valves are a superior product over other replacement- kite fix valves. After 2 previous failed attempts at fixing a leaky valve with the same product from a different shop with one fix being an at the shop fix by a supposed Kite Pro it only took just a few minutes to make a fast permanent fix!
product deserves 10 Stars!
& the same for the crew 2 Kiteboarding.com
Thanks again
Raymond Howard
http://www.facebook.com/pages/Didges-I-Doo/142471785788230
fixmykite valves rock

- 9/24/2010

got my kite fixed in less than 30 min. good price. kiteboarding.com is great on shipping and service.
Click to review this product