New for 2020 is the full carbon, low profile FoilMount 3.0 Carbon.

M6 Hydrofoil Track Stainless Steel T-Nuts

These are Replacement M6 Stainless Steel T-nuts for any hydrofoil that uses the M6 T-nut including Takuma, Naish and others  These are hard to get replacements that we now have in stock.  They are sold individually, so if you need a set of 4 make sure to buy 4 of them.  Watch the video below for our testing of the M8 version against the brass version.

Here are the total dimensions of this part:

Track width: 8.5mm
Total width: 14.9mm
Total length: 23.9mm
Total height: 6.20mm

M8 Hydrofoil Track Brass T-Nuts

Extra brass T-nuts for your tracked hydrofoil.  These are salt water approved and perfect for all track systems.  They are M8 standard metric threads which is the convention for most hydrofoil tracks.

M8 Hydrofoil Track Stainless Steel T-Nuts

These are low profile replacement M8 Stainless Steel T-nuts for any hydrofoil that uses the M8 T-nut, which just about all Tracked hydrofoils.  These are low profile meaning they are thinner than stock brass T-nuts by about 2.2mm from top to bottom but STRONGER.

Wizardhat Hardware Set

The CrazyFly Binary Binding is a brand new addition for 2019. It offers quick adjustments, even on the go, that can be done with one hand. The footstrap design is a bit narrower for riders who prefer to push the toes up when edging or jumping. The Binary footstrap offers a wide range of adjustability and also allows for comfortable use of neoprene boots. The footstrap position can also be adjusted via the Binary Stix, which allow the footstrap to be moved towards the heel or towards the toes. Compatible with boards that have a 6.75-inch insert spacing.

• Mesh neoprene
• Flatlock stitching
• Attachment loop for wetsuit connection

Mystic Foil / Board Travel Bag

A kite-specific hydrofoil travel bag. The Foil Bag is fully padded with a dedicated padded compartment for mast, wings, and fuselage. Easily stow up to 2 complete foil sets unassembled, including a clear vinyl pocket with hook and loop closure for stashing tools and bolts. Handles and shoulder straps are padded too, for comfortable lifting in and out of the back of your rig, or carrying through the airport. Very versatile and durable.

Dimensions:

• 110 x 15 x 45cm
• 135 x 50 x 25cm

MYATIC MATRIX SQUARE

Sizes:
4'9"- 145 x 45 x 20cm
5'4"- 165 x 50 x 20cm
5'8"- 173 x 50 x 20cm


FEATURES:
- 4.9 twintip/wake. All shapes competable
- 5.4 and 5.8 stubby/lightwind. All shapes compatable
- XL wheels
- 360 Webbing equator
- Ergonomical shoulder strap (adjustable/detachable)
- EVA formed shoulder patch
- Core support strap (RED)
- Carry handles
- 3D mesh airvent
- Transparent inner pocket (2x)
- Heavy duty zipper
- Zipper protection edge
- Address card pocket

XL wheels
For extra smooth transport while traveling.

FABRICS
- HXcomb shell
- PVC coated 600D polyester
- Heavy duty tarpaulin (inside)

2019 Mystic Star Square Travel Bag.  

This travel bag is perfect for getting multiple kites and boards in 1 bag.  The heavy duty contruction of this bag make it perfect for any frequent traveler.

Features:

• Product details
• PVC coated 420D Polyester
• Heavy duty tarpaulin (inside)
• Twintip/wake. All shapes competable
• Protective padding on the critical parts
• 360 Webbing equator
• Ergonomic shoulder strap (adjustable/detachable)
• EVA formed shoulder patch
• Core support strap (RED)
• Carry handles
• 3D Mesh airvent
• Transparent inner pocket (2x)
• Heavy duty zipper
• Zipper protection edge
• Address card pocket

 Are you looking for an inexpensive and universal introduction to kiting and you are not yet committed to a specific direction? Whether you want to enjoy kitesurfing, land kiting or just for fun, the Fluxx is the right choice for you. We have attached great importance to easy, stable handling and good balanced flight characteristics. Even if the Fluxx has a ground contact, the sturdy, strong,  and special shaping means that it can be relaunched with only two lines. Use the Fluxx as a trainer kite and open up the fascinating world of kitesurfing! Become a part of our passion.

PROPERTIES:

    Completely leashed and ready to fly
    Stable Flight behaviour
    Automatic Relaunch
    Robust processing
    Perfect as preparation for the introduction to power kiting

 

CONTENTS:

    Sleek HQ4 bag with tag insert
    Control Bar
    Trainer Kite Guide
    Optional Accessory: Safety System- This safety system for 2-line control bars makes it possible to release the control bar in an emergency without loosing the kite.

HQ RUSH PRO - 3 Line Trainer

•     Extremely robust cell structure
•     Third line for optimum safety and reliable reverse start
•     Ready to fly on a leash
•     Reduced scale for less drag
•     Good light wind properties

•     Sleek HQ4 bag with straps
•     Control Bar
•     Trainer Kite Guide
•     Safety system (hand leash)

North XL Kite Pump,  24". Includes heavy duty hose for long life of use.

Double Action Kite Pump with tall body, high-airflow piston and single/double action switch for faster, easier inflation. Includes anti-sand filter and seals for long life of pump and kite, integrated shockproof pressure gauge and leash to secure the kite during inflation. Larger diameter hose for rapid inflation and deflation.

Features:

• Ergonomical handle
• Capacity 2.9L with maximum pressure 13psi
• Updated single/double stroke switch
• Air filter on inlet which keeps out sand and dust
• Longer body and high-airflow piston
• Integrated gauge meter
• Super flex hose with screw connection

PKS Slider Option for Ozone Alpha

This is a system designed by Jeff Howard to change the Ozone Alpha bridle system from a static bridle to a sliding bridle. Made with Ronstan Low Friction Shock Blocks and Spectra Line, the PKS Slider option for the Ozone Alpha will make make the kite smoother in turns by changing the turn radius of the kite and allowing the leading edge to ease into direction changes. By installing the slider option, you can reduce bar pressure, maintain power and control, and smooth the overall feel of the kite.

The Crazyfly QuickFix Bindings are the Number 1 choice for a comfortable, super cush, pad and strap kit that is very easy to mount and remove, adjust, and will last and last. Compatible with boards that have a 6.25-inc

The CrazyFly Binary is a brand new addition to our range of bindings. It offers quick adjustments, even on the go, that can be done with one hand. The footstrap design is a bit narrower for riders who prefer to push the toes up when edging or jumping. The Binary footstrap offers a wide range of adjustability and also allows for comfortable use of neoprene boots. The footstrap position can also be adjusted via the Binary Stix, which allow the footstrap to be moved towards the heel or towards the toes. Compatible with boards that have a 6.75-inch insert spacing. A Perfect option for anyone that rides with thick booties or simply prefers the simplicity of a single strap adjustment.

Binary Straps

The footpad has a 3D ergonomic shape and dual density EVA for the best possible comfort and fit. The pad can be moved in six directions: up and down, left and right, and also angled clockwise and counter clockwise.

Our designers were hard at work to create the best possible ergonomic fit and hand picked premium materials for long lasting durability and luxurious comfort. The outdoor performance leather from Italy on Binary footstraps is extremely resistant to abrasion, sun rays and salt water. On top of premium materials, the Binary binding is made in Europe, in the CrazyFly factory.

The Binary Binding  Luxurious comfort and one hand adjustability.

h insert spacing.

Mystic Adaptive Leash Eye

Perfect for adding a leash connection point to any harness with 1" or narrower webbing.

2019 Mystic Kite Handle Pass Leash - Long Various Colors

FEATURES

- 130cm length (unstretched)
- Soft touch, lightweight material
- Double lock carabiner with swivel (1100kg)
- Neoprene carabiner cover
- Designed for unhooked / freestyle performance

Length = 51 inches (130cm)

Kiteboarding.com Bumper Sticker Style Logo.  The Shirt is designed and printed in the USA.

Features

• Designed and printed in the USA
• Quality screen printing

Kiteboarding.com Kiter Badge Style Logo.  The Shirt is designed and printed in the USA.

Features

• Designed and printed in the USA
• Quality screen printing

Kiteboarding.com Kiter Badge Style Logo.  The Shirt is designed and printed in the USA.

Features

• Designed and printed in the USA
• Quality screen printing

Kiteboarding.com Rooster Badge Logo.  The Shirt is designed and printed in the USA.

Features

• Designed and printed in the USA
• Quality screen printing

2019 Mystic Kite Safety Leash - Long

Features

•  110cm length (unstretched)
•  Soft touch, lightweight material
•  Compact carabiner
•  Neoprene carabiner cover
•  Designed for freeride / allround performance
• Multiple colors from bright to dark

Length = 43 inches (110cm)

2019 Mystic Kite Safety Leash - Short Various Colors

Features

•  45cm length (unstretched)

•  Soft touch, lightweight material

•  Compact carabiner

•  Neoprene carabiner cover

•  Designed for freeride / wave performance

Replacement Duotone Max Flow Hose Clamps

Duotone Part 44900-8777

The FixMyKite.com Duotone 90 Degree One Pump Valve is the OEM valve Dupotone kites uses for Struts One Pump system.

FixMyKite.com Self-Stick-Valves will stick on any bladder material or color.  Simply peel and stick to make a fast and easy repair, or attach to a newly replaced bladder.  The specially formulated adhesive is incredibly durable making for a permanent repair.  Everything needed for installing the new valve is included in the package:  alcohol wipe and detailed instructions.

The FixMyKite.com North Lazy Pump Gen. 1 Valve is the OEM valve North kites used for all one-pump connections from 2011-2012 (Generation 1). These also will work on the Best Kites one-pump systems from 2013 and newer. Made with TearAid to work with any bladder.

FixMyKite.com Self-Stick-Valves will stick on any bladder material or color.  Simply peel and stick to make a fast and easy repair, or attach to a newly replaced bladder.  The specially formulated adhesive is incredibly durable making for a permanent repair.  Everything needed for installing the new valve is included in the package:  alcohol wipe and detailed instructions.

The 2019 Crazyfly Short Kite Leash is their standard kite safety leash.  It features a push-away safety release with 3-D sure eva foam grip for easy releasing with confidence the first time, every time.

High-grade materials mean it is both high-visibility and will last for years even with UV exposure.

A BIG 6" x 6" Tear Aid patch for those large patch jobs.

Modified in house to function as a strapless seat harness by Kiteboarding.com
The 2018/2019 Dakine Fusion is designed for the needs of todays kiteboarders. Maximum lower body support with the ability to raise or lower the hook depending on the riders preference. A great harness for beginners and expert riders.

2019 Dakine Kite Leash Shorty.  Short leash with standard push away release. If you like minimal and functional, this is the leash for you. Clean, simple, and easy to use if you ever need it. Will fit on virtually and harness out there.

• Stainless steel carabiner with padded cover
• 1/4" (6.5MM) highest quality urethane Dura-Cord for
• maximum strength
• Molded Opti-Flex Leash ends for maximum durability
• Push away disconnect attachment

• Floating hat designed for water use
• Quick dry Nylon Taslan or Polyesterfabric is rated UPF 50+
• Hybrid style foam brim
• Removable chin strapt
• Wicking inner lining

The KB Windsock, limited availability. It's perfect to display your love of Kiteboarding.com and also functions as a wind-reading tool to know wind direct and windspeed. Represent your favolrite kiteboarding shop!

Comes with small mounting pole and opening ring.

The FixMyKite.com Universal 90 dergee One Pump Valve is the perfect replacement valve for Kites manufactured with a 1" casing opening.

• Ben Wilson
• Wainmann
• Peter Lynn
• Star
• Griffin
• Any Kite with a 1 inch vale opening

• Extra Large, fast pumping
• Pressure Gauge
• Sturdy Hose
• Single and double action
• Three valves

Airush replacement pigtails for the wingtip bridles. These pigtails connect to the bridle lines coming off the kite and are where you to hook up your outside flying lines. These work with newer Airush 4-line kites.

A clean and simple design, the Ozone Compact Contact Water Freeride Control Bar features an easy-to-use trim system and features our latest innovation - the Ozone Megatron Click-In Loop. The innovative Ozone Megatron Click-In Loop is an all-new push-away quick release with an innovative one-step Click-In reload function that is incredibly intuitive. The release handle fits comfortably in the hand, it is quick and easy to activate the release by pushing the handle away. Smaller chicken loop brings the bar closer to you.

The Ozone Handle Pass Leash V2 makes passing over your head and around your back even easier with the leash length around four feet. Enhanced with a snap shackle for easy hooking in and out. Ozone quality with super strong webbing and bungee covered with extra soft neoprene. This leash can handle anything you throw at it and is built for safety with a easy grip sure-fire push away quick release that's easy to reload.

The Ozone Short Leash V2 makes hooking up to your kite even easier. Designed with a short line to be connected directly to your harness or spreader bar with a new high strength snap shackle for easy hooking in and out. Ozone quality with super-strong amsteel line. This leash can handle anything you throw at it and is built for safety with a sure-fire push away quick release that's easy to reload.

Ozone Bar Floats, they work as replacements on the older Ozone Contact Water, Snow, and Race bars, or use them for building your own custom bars.

The Dakine Surf Cap Hat is a quick-drying nylon water hat designed with features to keep it on your head in even the most pounding surf. The brim on the Surf Cap flips up for paddling out and the adjustable chinstrap includes cooling ventilated mesh over the ears to keep the hat firmly in place without compromising comfort. This everyday Surf Cap provides welcome sun and eye protection out in the water.

One of the most popular water wear accesories are these awesome water jerseys. The Kiteboarding.com Water Jersey keeps you going during the longest sessions. Wearing this shirt is like kiteboarding in the shade!

The Crazyfly Chickenloop PU Tube is the stock part that comes with all Sick Bars. This PU Tube will work with all Crazyfly bars 2015 and newer.

The Ozone Megatron Chickenloop V4 Click-In Loop retrofit kit includes the push-away release system, small harness loop with lock tube, PU-covered Amsteel depower line, stainless steel swivel ring, and flag out bungee line. The chickenloop retrofit kit works as a replacement for Contact Race and Foil Race V4 bars.

Previously known as Iron Mend, the Tenacious Tape Iron-On Neoprene Patch can fix rips, holes and tears on anything made of neoprene to provide strong, flexible, permanent repairs. Tenacious Tape may be used to repair neoprene dry suits, wet suits, waders, neoprene gloves and boots, orthopedic supports, and lycra body suits. The Tenacious Tape increases garment life and the stretch fabric allows flexibility and comfort.

Replacement Ozone Chickenloop V4 harness loop and lock tube. This replacement works on Ozone Contact Water, Foil Freeride, Snow, Race, and Foil Race bars.

Replacement Ozone Megatron Chickenloop V4 Click-In Loop assembly. This part includes the push-away release system, harness loop, medium lock tube, and PU-covered Amsteel depower line. The chickenloop works as a replacement for Contact Bars Water, Foil Freeride, Race, and Foil Race V4 bars.

The Ozone Chickenloop PU/Amsteel Line works as a replacement for the Contact Water and Foil Freeride Control Bars V4 Click-In Loop.

The Ozone Chickenloop PU/Amsteel Line works as a replacement for the Contact Race and Foil Race Control Bars V4 Click-In Loop.

The Ozone Chickenloop Trim Line works as a replacement for the Contact Water and Foil Freeride Control Bars V4/V5 Click-In Loop.

A clean and simple design, the Ozone Contact Foil Freeride Control Bar features an easy-to-use trim system and features our latest innovation - the Ozone Megatron Click-In Loop. The innovative Ozone Megatron Click-In Loop is an all-new push-away quick release with an innovative one-step Click-In reload function that is incredibly intuitive. The release handle fits comfortably in the hand, it is quick and easy to activate the release by pushing the handle away.

A clean and simple design, the Ozone Contact Water Freeride Control Bar features an easy-to-use trim system and features our latest innovation - the Ozone Megatron Click-In Loop. The innovative Ozone Megatron Click-In Loop is an all-new push-away quick release with an innovative one-step Click-In reload function that is incredibly intuitive. The release handle fits comfortably in the hand, it is quick and easy to activate the release by pushing the handle away. One of the cleanest control bars out there.

It's easy to session so hard you forgot how many sessions you sessioned. Always have charger on hand just in case. Perfect for the car, plane, or alongside your phone each night - always be ready to ride!

Woo 3.0 Mount

Session so hard you broke your board? Do you have a fleet of rides to take out? Get them all mounted up so you never have to worry about missing a session. The new 3.0 mount works for kiteboarding, wakeboarding, snowboarding, and skiing. Simply attach the adhesive, strap in your WOO, and go send it.

• Simple Elegent
• Simple retainer ring mount
• Compatible with all WOO versions

• Includes:
  1 - Self Adhesive Woo Mount with Retainer O rings
  2 - Spare Retainer O Rings

The Ozone Pro Tune Speed System offers minute adjustment of the speed system to keep the kite performing at its best in the correct trim. Durable line materials reduce wear and tear on the pulley lines, with increased resistance to stretch or shrinkage for a longer life span. The Speed System is a double-pulley layout using high-spec, low-friction Ronstan Orbit Block pulleys.

Breathable mesh back and light weight design makes this the perfect hat for keeping the sun off your head and out of your eyes on sunny days.

The Ozone Chickenloop PU/Amsteel Line is the replacement line that runs through the center of the chickenloop, bar, and depower system. This line can be used to easily replace the lines on Ozone Contact Race Control Bars 2012+ model year for both Ozone Megatron and Megatron II Chickenloops.

Scoprega's Bravo 20-2 electric pump is a newly upgraded model for 2019 that features a larger dual motor for faster and more efficient inflation of inflatable paddle boards, boats, kayaks, rafts, dinghies, tubes, toys, and more.

Twin-cylinder, single-stage pump fills quickly and to higher pressure than most electric pumps on the market. An easily-selectable pressure dial indicator lets you choose the PSI and automatically shuts-off when the desired pressure is reached. The pump houses an internal, rechargeable battery that can be easily trickle-charged using the included wall charger. If the battery is drained but you still want to pump something, the pump can be run from other 12V power sources such as a car battery using the included power cable with alligator clips.

Naish Flag Out Line. Compatible with Torque bar ATB, BTB and Base bar.

The Dakine Full Finger gloves combines ultimate performance and styling, protecting your hands and fingers with a durable construction. Save your hands from the abuse of a full day on the water, and pack a pair of sailing gloves next time you head out. The compression molded neoprene and non slip palm material of the Half Finger Sailing Gloves keep your grip true. Breathable mesh construction gives you maximum comfort even on especially warm days. Also available in a fingerless version, this full-finger option gives you maximum protection for your hands and fingertips for a full day of comfort on the water.

Dakine Club Wagon

All bags now wider to accommodate more boards!

Travel incognito with the Dakine Club Wagon Travel Bag. This high capacity golf style rolling kite gear bag has a single entry top zip that makes it easy to pack at all your gear inside. All terrain urethane wheels along with the padded front pull handle make it a breeze to roll.

The 2018 Dakine Wahine has an all new shape made with a Curv Composite Semi-hard shell and the Push Button dual sport spreader bar system.  The Wahine is specifically designed for female kiters and windsurfers in mind.

We use G10 1.5cm fins with a very thin profile in order to prevent drag. G10 is the highest rating of Fiberglass fins are made of, and these fins are durable and hard to break. G10 material is the best solution in the industry.

The FixMyKite.com Naish Octopus One Pump Valve set is the perfect replacement valve for the Leading Edge One Pump Valve (Male valve) and strut one pump valve (Female Valve).  Choose from male, famale, or both to complete your replacement.

The FixMyKite.com Naish Octopus One Pump Valve set is the perfect replacement valve for the Leading Edge One Pump Valve (Male valve) and strut one pump valve (Female Valve).  Choose from male, famale, or both to complete your replacement.

Do you ever leave your foil attached to your deck and just put it in the back of your car or truck and worry about damaging your foil deck? We've seen lots of people do this and we have a solution to protect your foil deck. This PKS single board bag is custom-cut with a slot so you can leave your foil attached to the board while protecting your foil deck. The PKS single board bags feature thick padding, shoulder strap, and durable design to keep your board looking new. No more scratches and dings from tossing your board in the back of your truck.  Add  the PKS foil covers to protect the entire foil, mast and wing!

The new PKS Adjustable Universal Pigtail is the latest and great pigtail for a universal connection between kite and bar. These pigtails are similar to our classic universal pigtail, but are made extra-long and feature a moveable figure-8 knot to allow for adjusting the pigtail length. This is great if your lines settle to different lengths and you need to tune them to get them to be all the same length.

Ozone kitesurf line sets are made to be used with all Ozone Contact Water and Race bars on the Catalyst, Enduro, Reo, Zephyr, Edge, C4, Chrono, R1, Hyperlink, and all older Ozone 4-line kite models. These fly lines are all even length.

With only a few exceptions, the PKS HD Premium Pump Hose will fit most any Kite/SUP pump out there (new and old) and is heavy duty, flexible, and kink-resistant. The MALE end of the hose attaches to the pump while the FEMALE end attaches pump adapters/nozzles.

Before now, hoses have not been sold separately. Manufacturers would rather sell complete new pumps rather than a replacement hose. Most kite pump hoses are not super-duty and crimp, kink, or crack over time, but now you can replace them easily and at a fantastic price. This is the same hose on the PKS Pro Flow V2 AND v3 Kite Pump.

This threaded big Boston valve (screw valve) pump adapter/nozzle fits on any standard kite pump hose. It works with several large Boston valves (screw valves) on the market today including Ozone (2011 and newer), and Naish, Crazyfly, and Airush (2015 and newer), and Switch kites. This adapter screws onto the top of the Boston valve for a more secure fit compared to the friction-fit adapters typically found on most pumps.

The Adjustable H3 SUP Pump Adapter is compatible with a variety of stand up paddleboards and Flysurfer. There are three colored rings on the adapter that allow it to fit a variety of H3 valve depths. The black ring is rubbery and provides a good pressure/friction fit while the yellow and green rings are made from plastic and can be taken off to custom-set the depth of the valve. Inside the middle of the adapter there is also a screw that has and adjustable height.

The Crazyfly QuickFix Bindings are the Number 1 choice for a comfortable, super cush, pad and strap kit that is very easy to mount and remove, adjust, and will last and last. Compatible with boards that have a 6-inch insert spacing.+

- Works on any 6 inch Insert spacing board.

The Ozone Snowkite Kompressor bag keeps your foils packed down for easy travel. Webbing straps cinch down the kites and keep them small for packing. The Ozone Kompressor bags are great for travel and general kite storage. Easy holds a couple foil kites.

The Slingshot Foot Hooks provide key leverage and a locked-in feel with the confidence of knowing you can kick free of your board when you crash. 

Built in Switzerland, the Skywatch BL400 is a complete weather station connected to your smartphone via Bluetooth wireless technology. It accurately measures wind speed, temperature, humidity, and measured data can be stored and shared on Facebook, Twitter, Instagram or bl.skywatch.ch. The Skywatch BL400 is especially dedicated to all outdoor activities like sailing, kite surfing, paragliding, hiking, sailing, as well as professional use such for agriculture, construction, and more.

The Skywatch BL500 is a complete weather station connected to your smartphone via Bluetooth^? wireless technology. It measures accurately wind speed, temperature, humidity, pressure and UV index, and permits you to share your measurements on most popular social networks.

The Skywatch BL500 is especially dedicated for all outdoor activities like sailing, kite surfing, paragliding, hiking and so on. It is also very usefull in professional activities, in agriculture and on construction sites, for example.

KB Kiter - Redesigned and updated.  Perfectly stated with subtlety.  The Shirt is designed and printed in the USA.

The PKS replacement for 2013-2022 and newer Duotone / North Depower Replacement line is almost identical to the line that comes on North kites. TheDuotone /  North Depower line has a knot on one end with Dacron tape on the other end for easy installation. It's a quick and easy fix to replace your old worn-out line.

Tear Aid Bladder patches are the BEST patch out there to seal leaks and small cuts in bladders.  The roll can be cut into any size desired for patching, whether your bladder problem is small pinholes or 2-foot long cuts. 30 ft. x 1.25-Inch or 3-Inch or 6-inch Rolls (60 patches).  Note that long cuts (more than 6 inches) or cuts next to the seam of bladder can be harder to ensure a good seal on.  Long cuts are rarely straight lines.

 

PKS Travel Golf Bags are the best way to travel light. No wheels means less weight, means more gear. Extra padded side walls, with compression straps all around.  Shoulder straps make this an easy carring option when traveling.

PKS single board bags feature thick padding, shoulder strap, and durable design to keep your kiteboard looking new.  No more scratches and dings from tossing your board in the back of your truck. A must have for every board!

 

This big Boston valve (screw valve) pump adapter / nozzle fits on any standard kite pump hose.  It works with several large Boston valves (screw valves) on the market today including Ozone (2011 and newer), Naish, Crazyfly, Airush (2015 and newer,) and Switch kites.

The Liquid Force Valve Pump Adapter/Nozzle is compatible with Liquid Force kites manufactured 2011 and later with the Max Flow valve.

The PKS Universal Pump Adapter/ Nozzle -  Set fits on standard kite pump hoses with a bayonet connection.  The set includes an adapter for compatibility with pretty much any kite out there.

• S1 Standard Pump Adapter for 7mm and 9mm Valves
• BC Pump Adapter for Big Boston Screw Valves
• V2 Universal Kite Valve Pump Adapter for SUP Style Naish/Flysurfer/F-One/Core
• A2 Pump Adapter for North, Core, Eleveight, RRD and Cabrinha Airlock 2 Valve Pump Adapter
• M2 Max Flow Pump Adapter for Liquid Force Valves/ Reedin
• S3 Pump Adapter for Duotone and North Airport Valves with Silicone Ring

The 7mm and 9mm Pump Adapter is compatible with almost all kites prior to about 2008.  Nearly all older kites which include the 2 valve inflate and deflate systems included 9mm or 7mm valves.  This is also the adapter used for inflating struts on kites without a one-pump system.

The RRD Inflate/deflate Screw Valve will replace the inflate/deflate on RRD kites.  From the Leaders in Kite Repair technology, Fixmykite.com Self-Stick Valves will stick on all bladders Simply peel and stick to make a fast and easy repair, or stick it on any new bladder.

Cabrinha adjustable pigtails for a 4-line kite. These pigtails attach to the end of your fly lines to connect to your kite. The pigtails can be adjusted by moving the knot on the pigtail to adjust the size of the loop. Always be sure to check you pigtails for wear and tear.

Wind, waves and sun. Surf, SUP and sail. The Dakine Surf Trucker stays put through it all to shade your eyes. The classic trucker hat features quick-drying nylon and an adjustable chin strap for a secure fit.
 

OZONE UNO v2 Inflatable Trainer Kite
The Ozone Uno is an easy to use, inflatable trainer that is great for learning kiteboarding. The Uno can be used with almost any four-line bar and allows the student to learn about sheeting the bar in and out in addition to turning the kite left and right.

The Uno V2 is a simple, affordable, and robust inflatable depowerable trainer kite. It's an ideal kitesurf trainer for schools, and perfect to have as a fun addition in the quiver to get family and friends into kiting! Being a lightweight package it is easy to travel with and keep in the car.

Responsive, fun, smooth, and stable define the Uno V2. It comes in three sizes - 2.5m, 4m and 6m all with enough power to ensure beginners can easily progress to the next level.

The Uno V2 flies with the Ozone Contact Water Control Bar or any even line set bar.  this enables the student to progress easily to larger kites and to remain familiar with the control system set up. We recommend using line lengths of 15-25m on the 45cm bar.

The Uno V2 is amazing for teaching; the student can learn all the basics of flying an inflatable kite and how to use the release systems while using a small sized kite with less power. The Uno V2 is also ideal for lighter weight riders under 100 pounds for riding on the water.

The Uno V2 can also be used for first lessons on land. No previous kite experience is required when accompanied by a competent adult kiter or instructor.

The FixMyKite.com Star Boston Screw valve is the OEM valve on Star kites 2015 and newer.

Choose which Airush Kiteboarding Board Screws you need. Great replacement if you ever lost a screw on the water or during travel. Choice of handle, pads/straps, and fin screws for Airush kiteboards from 2013 to the current model year.

Get more performance for kite racing or light wind riding with reduced drag from Ozone Pro Race Lines. These even-length lines are compatible with any Ozone Contact Water Freeride, Race bar, and many other bars on the market.

The race lines are thinner in diameter than most standard kiteboarding lines, offering reduced parasitic drag for faster speeds on the course and better performance in light winds. Using race lines you will notice a huge gain in performance upwind and downwind.

These extensions are made from Ozone race lines which are made from the highest quality, pre-stretched Dyneema available

Pump your kite with Ozone style with Ozone's kite pump. The pump comes with a PSI meter integrated into the handle for measuring your pressure and also stops you from losing the gauge. Standard and Big Boston inflate adaptors are compatible with most inflate valve types.Includes heavy duty hose for long life of use.

The Naish Swivel for Naish Universal and Fusion bars. The top part of this swivel holds the front lines and the bottom pulley connects to the chickenloop depower rope.  Swivel to keeps the front lines untangled.

The Naish XL Inflate/Deflate Kiteboarding Valve will replace the inflate/deflate valve on all 2015 and later Naish Kites.

Designed to offer style and functionality. The CUMBUCO by OCEAN Sunglasses has everything that any water sports lover would wish for.  The Polarized lens with ATOM system which provides safety. Coating-water repellent and Anti-impact protection.  Features a polycarbonate material for a light yet durable product.  The head strap is adjustable to ensure a secure and comfortable fit.

2" Wide (Two-inch Wide) Dacron Tape should be used to repair all cuts in the leading edge and struts of an inflatable kite.  The dacron tape will provide the strength needed to repair small cuts without creating a huge mess to undo later if you decide to get the repair done professionally.

Ripstop sail tape is the best way to repair cuts in the sail of your kite. This "peel and stick" Nylon tape will provide the strength needed to repair small cuts in your kite to get you back out on the water fast.
*Can also be used on paragliders and sails.

Naish Flag Out Line Bungee. Compatible with both Fusion and Universal Systems

Q-PowerLine Pro is the only line specifically engineered for Kiteboarding/Power Kite applications, and it's no wonder there's nothing better when you see what it is: high-strength, low-weight, low-drag, coated line reduces tangling. Linesets come with loops on all ends, but can add custom pigtails.  

All your kite repair needs in a nice package with a nice price!

FixMyKite Fix Kit, One-pump Hose Kit, Ripstop Sail Tape, Kook-Proof Pigtails, and the TearAid 2-Pack.

FixMyKite.com Cabrinha Sprint 90-degree One Pump Valve is the perfect replacement valve for Cabrinha Kites manufactured in 2007 and later.

FixMyKite.com Self-Stick-Valves will stick on any bladder material or color.  Simply peel and stick to make a fast and easy repair, or attach to a newly replaced bladder.  The specially formulated adhesive is incredibly durable making for a permanent repair.  Everything needed for installing the new valve is included in the package:  alcohol wipe and detailed instructions.

If you're unsure which value is required for your replacement project, please do not hesitate to contact us. Email: [email protected] or phone:  361-704-6659

The FixMyKite.com Duotone Straight One Pump Valve is the OEM valve Dupotone kites used for Leading Edge One Pump system.

FixMyKite.com Self-Stick-Valves will stick on any bladder material or color.  Simply peel and stick to make a fast and easy repair, or attach to a newly replaced bladder.  The specially formulated adhesive is incredibly durable making for a permanent repair.  Everything needed for installing the new valve is included in the package:  alcohol wipe and detailed instructions.

The FixMyKite.com North Airport Inflate/Deflate Valve will replace the inflate/deflate on all 2014-2016 models except the 2014 Vegas.  This blue cap valve is also a replacement for the North Yellow cap Inflate/deflate valve.

The FixMyKite.com North Inflate non-return Valve is the OEM valve North kites used from 2011-2013 plus the 2014 Vegas. A unique non-return valve, it allows for 1-way airflow for Inflation only. Made with TearAid to work with any bladder.

The FixMyKite.com North Lazy Pump Gen. 2 Valve is the OEM valve North kites used for all one-pump connections from 2013-current 2016 models (Generation 2). Made with TearAid to work with any bladder.  (Also compatible with 2015 or newer CrazyFly One-Pump systems.)

The FixMyKite.com Cabrinha Airlock 2 Screw Valve is the new inflate/deflate screw valve with a built-in pump adapter that connects straight to any standard pump. Cabrinha started using these on 2014 kites, so they work on any 2014 and newer Cabrinha. The CAP will NOT WORK in the old Airlock 1 valve base (Cabrinha Airlock with old-style cap, pre-2014), but WILL WORK in 2014 and newer Cabrinha Airlock 2 valves. Also works on cloud kites by board riding maui. Made with TearAid to work with any bladder.

The FixMyKite.com Slingshot Complete Screw Valve is the new inflate/deflate screw valve with a built-in pump adapter that connects straight to any standard pump. Slingshot has these on some 2015 and newer kites.

Choose which Cabrinha Kiteboarding Board Screws you need. Great replacement if you ever lost a screw on the water or during travel. Choice of handle, pads/straps, and fin screws for Cabrinha kiteboards from 2014 to the current model year.

Choose which Naish Kiteboarding Board Screws you need. Great replacement if you ever lost a screw on the water or during travel. Choice of handle, pads/straps, and fin screws for Naish kiteboards from 2015 to the current model year.

MBS Core 94 Mountainboard - Axe

MBS' Core 94 is the ideal choice for kiters and mountainboarders who don't want their riding potential to be limited by the cash in their wallet.

The Ozone Stopper Ball is made from strong, durable and high quality plastic. Once the hex screw is tightened it does not move. This stopper ball is located at the base of the clamcleat and end of the depower pull strap.

MBS Comp 95 Mountainboard - Birds

Made from stainless steel, the Ozone Trimmer Bracket is solid and sturdy. The trimmer bracket is where the center lines connect to the bar.

Ozone Kiteboarding Race V2 Fly Lines (2 x 300 kg & 2 x 200 kg)

Get more performance for kite racing or light wind riding with reduced drag from Ozone Pro Race Lines. These even length lines are compatible with any Contact Water Freeride or Race bar.

Turbo Charge your kite racing or light wind setup with our high performance race lines. These lines have been developed to work in unison with the Contact Race Control System. Race Lines can also be fitted to the standard Contact Water and Chrono Control Systems.

The race lines are thinner in diameter than our standard lines, offering reduced parasitic drag for faster speeds on the course and better performance in light winds. Using the race lines you will notice a huge gain in performance upwind and downwind.

All Ozone lines are made from the highest quality Dyneema available, pre-stretched, and sewn in our own factory.

• High performance, low drag
• Colour coded and numbered
• 300kg front lines, 200kg back lines

FixMyKite.com CrazyFly One Pump Kiteboarding Valve replaces valves on all CrazyFly kite models 2015 and newer.  Also a compatible replacement for North Lazy pump Gen. 2, Ozone, Slingshot, and Flexifoil.

The Switch one-pump Self-Stick valves are the OEM valves on Switch kites; also compatible with slingshot, Flexifoil, Ozone, Mutiny, and North (Lazy Pump, Generation 1 only.)

The FixMyKite.com Switch Boston Screw valve is the OEM valve on Switch kites 2015 and newer.  Can also be used on Ozone kites (2011 and newer).

The Skywatch Eole by JDC offers you a hand-held Anemometer with deluxe features. The large, easy-to-read display shows instant windspeed, maximum windspeed, and average windspeed all at once, while the 54mm impeller on the Eole provides very accurate readings without worrying about the position of the instrument. Many uses like kiteboarding, sailing, SUP, hunting, kayaking......

The Skywatch Meteos offers you a hand-held Anemometer/Thermometer with deluxe features. The large, easy-to-read display shows instant windspeed, maximum windspeed, average windspeed, instant temperature, maximum temperature, average temperature, minimum temperature, and wind chill factor all at once, while the 54mm impeller on the Meteos provides very accurate readings without worrying about the position of the instrument. Many applications like kiteboarding, fishing, hunting, sailing, kayaking, SUP....

The WeatherFlow WEATHER Meter is the first WIRELESS  Bluetooth Smart portable and mountable weather station under $100 that syncs up to Smart phones and devices so you can record, share, and save all the weather data you could need. Works with iOS and Android devices to measure the wind speed.  Small enough to fit in your pocket.

MBS Atom 90 Mountainboard

PKS Trainer Kite Lines fly above the rest. PKS trainer lines are rated at 200 lbs breaking strength. The PKS Trainer lines are made from Pre-stretched Spectra to the standard trainer line length of 20 meters. Stitched loops on both ends ensure easy larkshead connection to any trainer kite brand out there. 20 meters is the standard length for trainer and small-foil lines.

We can manufacture CUSTOM LENGTH trainer kite lines if you want them shorter or longer for special applications. Please contact us for custom line prices.

These PKS lines will work on any trainer kite out there including HQ, Slingshot,  Ozone, Liquid Force, Best, Cabrinha, North, Airush, Naish, etc. Trainer kites are typically from 1m to 4m (square meters) in size.

The Crazyfly Chickenloop with Push-Away Quick-Release is the stock part that comes with all Sick Bars. The built in swivel and smooth-release make this one of the cleanest and most simple systems on the market.

The CrazyFly Depower Line is the line that you use to trim the power of your kite on the Crazyfly Sick Bar. These lines wear down over time with use, and it's a cheap and easy part to replace to ensure your bar is top notch condition.

Airush 2015+ SPS One Pump 90 degree Valve is the perfect replacement valve for all 2015+ Airush Kites that uses the Airush SPS One Pump 90 degree System.

The Airush XL Inflate/Deflate Kiteboarding Valve will replace the inflate/deflate valve on all 2015 and later Airush Kites.  This valve is also compatabile for use on Naish 2015 and later kites.

Q-PowerLine Pro is the only line specifically engineered for Kiteboarding/Power Kite applications, and it's no wonder there's nothing better when you see what it is: high-strength, low-weight, low-drag, coated line reduces tangling. Linesets come with loops on all ends, but can add custom pigtails.

The all new Ozone Wet Tech T Shirts work just as well on the water or in the bar.
The Tech Material dries in minutes and is available in Long or Short Sleeve, Lightweight, Moisture wicking, Wrinkle free and Silky-feeling comfort, we think you'll like it.

The Ozone One Pump Valve will work on any Ozone kites that has a one pump system. This valve is also compatible with Slingshot and Royal kites one pump systems.